# Tankless Water Heater Pricing | Total Tankless of SoCal

> Published tankless prices: installation $4,500–$7,500, full maintenance ~$479, basic flush $200–$250. Repairs quoted in writing. No hidden admin fees.

URL: https://socaltotaltankless.com/pricing/

![Technician presenting a written tankless estimate on a tablet to homeowners](/images/hero/technician-presenting-a-clear-written-tankless-wat.webp)

PRICE\_SHEET · NO HIDDEN ADMIN FEES

# Tankless Water Heater Pricing

We publish our price ranges because you should know what a fair number looks like before anyone shows up. Final installation pricing depends on unit size, brand and the code upgrades your home needs.

-   FACTORY-CERTIFIED TECHNICIANS
-   FREE VIRTUAL ESTIMATES
-   NO HIDDEN ADMIN FEES
-   MON–FRI 9 AM–5 PM
-   LA · ORANGE · VENTURA COUNTIES
-   SERVING SOCAL SINCE 2021

STATUS: FACTORY-CERTIFIED TECHNICIANS | FREE VIRTUAL ESTIMATES | NO HIDDEN ADMIN FEES | MON–FRI 9 AM–5 PM | LA · ORANGE · VENTURA COUNTIES | SERVING SOCAL SINCE 2021 ///

STATUS: FACTORY-CERTIFIED TECHNICIANS | FREE VIRTUAL ESTIMATES | NO HIDDEN ADMIN FEES | MON–FRI 9 AM–5 PM | LA · ORANGE · VENTURA COUNTIES | SERVING SOCAL SINCE 2021 ///

01\_PUBLISHED\_RATES

## Service Price Sheet

All prices in USD. Approximate figures are confirmed when you book.

| Service | Price | What's included |
| --- | --- | --- |
| SC_01 Tankless Water Heater Installation | $4,500–$7,500 | Includes code-required venting and gas upgrades, permit and warranty registration. Free in-home estimate. |
| SC_03 Full-Service Tankless Maintenance | ~$479 | Full flush, internal fan and flame rod cleaning, gas pressure set to factory spec, post-service report. |
| SC_04 Basic Tankless Flush | $200–$250 | Flow-aid descaling of the heat exchanger to remove mineral buildup. |
| SC_02 Tankless Water Heater Repair | Quoted after diagnosis | Written findings and quote before any work begins. |
| SC_05 General Plumbing Services | Quoted per job | Pipes, fittings, water lines, drains and gas lines for homes and businesses. Free virtual estimate. |

No hidden admin fees. Final installation price depends on unit size, brand and code upgrades. You approve a written quote before work begins.

02\_COST\_DRIVERS

## What Moves an Installation Price?

The $4,500–$7,500 range covers most tank-to-tankless conversions. These six factors decide where yours lands.

01

### Unit size

GPM and BTU input needed for the fixtures you run at the same time.

02

### Brand & design

Condensing vs non-condensing, plus brand and warranty terms.

03

### Gas line

Many homes need a 3/4-inch line from the meter to feed up to about 199,000 BTU.

04

### Venting

PVC, Category III stainless or concentric, and the length of the route.

05

### Permits & code

City permit, inspection, seismic strapping and gas shutoff requirements.

06

### Location

Garage, interior closet or exterior wall, and access for the crew.

Installation cost guide

[/guide/tankless-installation-cost-california/ →](/guide/tankless-installation-cost-california/)

 

Repair cost guide

[/guide/tankless-repair-cost-california/ →](/guide/tankless-repair-cost-california/)

 

Rebates & tax credits

[/guide/socalgas-tankless-water-heater-rebates/ →](/guide/socalgas-tankless-water-heater-rebates/)

03\_FAQ\_LOG

## Pricing Questions

STILL\_HAVE\_QUESTIONS

Send photos of your setup and we'll reply with answers and a price estimate during business hours.

Get a Free Virtual Estimate

[/contact/ →](/contact/)

 

(301) 555-8979

[tel:+13015558979 →](tel:+13015558979)

### How much does tankless water heater installation cost in Los Angeles?

Most installations run $4,500–$7,500, depending on unit size, brand and the venting, gas line and permit upgrades your home needs. Start with a free virtual estimate to see your range before anyone visits.

### How much is tankless water heater maintenance?

Full-service maintenance is approximately $479 and includes a full flush, internal fan cleaning, flame rod cleaning and gas pressure set to factory specs. A basic flush is about $200–$250.

### What's the difference between a basic flush and full maintenance?

A basic flush ($200–$250) descales the heat exchanger. Full maintenance (~$479) adds fan and flame rod cleaning and gas pressure calibration to factory specs.

### Will I need a bigger gas line for a tankless water heater?

Often, yes. A tankless unit can draw up to about 199,000 BTU versus roughly 40,000 for a tank, so many homes need a 3/4-inch line or a meter check. We size it during the estimate.

### How does the free virtual estimate work?

You send photos of your current water heater, venting and gas line through our estimate form, and we reply with a price estimate during business hours. Installations also include a free in-home estimate to confirm details.

![Technician finishing a clean tankless water heater installation in a Southern California garage](/images/misc/factory-certified-technician-finishing-a-clean-wal.webp)

NEXT\_STEP: FREE\_VIRTUAL\_ESTIMATE

## Get Your Number in Writing

Send a few photos of your current water heater and we will reply with a written price range during business hours. No hidden admin fees.

Get a Free Virtual Estimate

[/contact/ →](/contact/)

 

Call (301) 555-8979

[tel:+13015558979 →](tel:+13015558979)

-   Factory-certified technicians
-   No hidden admin fees
-   Mon–Fri, 9 AM–5 PM